- ChimeraX-users - RBVI Mailing Lists

Export Isolde residue paramters (xml) for phenix
by Sean Connell 21 Oct '23

21 Oct '23

Hello, Sorry If this has been asked recently and I missed it, but is there a way to convert the residues parameter XML file created by Isolde (for a ligand) into a restraints file that can be used in the phenix realspace refinement? Sean

2 7

Re: Movie Record/Encode with GPU?
by Tom Goddard 20 Oct '23

20 Oct '23

No. The only way to show multiple frames of a trajectory in ChimeraX is to open them as separate models. Tom > On Oct 18, 2023, at 9:37 AM, Alexander Hung Lee <Alexander.Lee(a)uga.edu> wrote: > > Oh, and I forgot to ask… Is there an option in command line to show all the hbonds in a trajectory concurrently, even if the bond shows up at a different point in time but not current frame? >

2 1

Surface calculation in ChimeraX
by Dennis Dannecker 20 Oct '23

20 Oct '23

Hello Chimera/ChimeraX team I recently asked already a question regarding the saving/exporting of vertices generated during the surface calculation in ChimeraX and the associated parameters with this surface generation. On a related note, I wanted to ask whether it is possible to also extract the surface (SESA and/or SASA) on a per atom basis. MSMS calculates not only the vertices for each atom (usually several vertices per atom) but it also calculates the SESA and SASA on a per atom basis. Now, I was wondering whether something is possible in ChimeraX too. As I was parsing through the docs, I was wondering whether ChimeraX calculates the surface no longer using MSMS. The vertices density supported by ChimeraX is considerably higher than what I can get with my standalone MSMS program (at least factor 6). So, if ChimeraX does not longer employ MSMS, what else does it use? With "MEASURE CONVEXITY" I get the surface vertex positions, normals, convexity values, and triangles. Unfortunately, the association with the corresponding residue is lost (however, can be regained with a little bit of work I guess, simply using euclidean distance). Question: Is there something similar for the SESA or SASA of the different atoms in the model/chain. In theory, this information should be available, at least the SESA. I am just wondering whether there is a way to write this out as a raw txt file in ChimeraX The closest I found in the save command is the .obj or .vtk format. However, both are semi-satisfying in that that they both do not provide the data looked for and are in somewhat special formats, at least the vtk. The .obj file is much much bigger than what MSMS or "measure convexity" generates, and not really handy for then working with the data in other programs, mainly python. As always, I very much appreciate any help and wish to thank the team for their contributions to the field. Best regards Dennis

3 5

ChimeraX Help
by Bani Kaur 20 Oct '23

20 Oct '23

Hi, I hope you are well! My name is Bani Kaur and I am a ChimeraX user. I wanted to ask you about how I can specify labels on ChimeraX, specifically with finding the names of the residues on a protein. Additionally, how does info residues work and info resattr. I would appreciate any help and guidance! Thanks! Best, Bani Kaur

2 2

ChimeraX fading?
by Elaine Meng 19 Oct '23

19 Oct '23

> On Oct 19, 2023, at 4:21 AM, Carl Johan Hagstromer <carl.johan.hagstromer(a)ki.se> wrote: > > Would love fading options, like in PyMOL > Hi Carl, We aren't Pymol users so we don't know exactly what you are referring to, but it may well be possible in ChimeraX if you could give more detail. We can put this discussion on chimerax-users(a)cgl.ucsf.edu (CC'd here) so that more folks can weigh in. ChimeraX can do: depth cueing (fading front->back), gradual fading in/out of structures and/or 2D labels by increasing or decreasing transparency over a number of image frames, and/or color modification (e.g. increasing whiteness of all current colors). Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

3 2

Isolde usage in Chimera
by Dmitry Semchonok 19 Oct '23

19 Oct '23

Dear colleagues, How to drag the structure, preserving the secondary structure (alpha-helix and beta-sheet) geometry in Isolde? Can I set up certain restraints to keep the correct geometry of the structure while dragging it? Many thanks! Kind regards, Dmitry

2 1

Uncaught bounce notification
by postmaster＠cgl.ucsf.edu 18 Oct '23

18 Oct '23

From: "Sen, Anindito" <andysen(a)tamu.edu <mailto:andysen@tamu.edu>> Subject: command for moving atomic models in ChimeraX Date: October 18, 2023 at 5:51:07 PM PDT Dear All, I have a set of 8 proteins forming a mega complex that we are working on. The density map of the mega complex has a resolution of 2.7Ang. The atomic structures of the proteins were determined. Out of the 8, proteins 3 have C5 symmetry. I am trying to generate potential models using the atomic structures where these pentameric proteins can be expanded out (kindly see the schematic diagram S1 to S2). Is there a command (move command ??) to do so? Thanks Stay safe & Regards Anindito Sen. Ph.D Microscopy and Imaging Center Texas A&M University 301 Old Main Dr College Station, TX 77843-2257 Office: ILSB Room 1133 <http://microscopy.tamu.edu/>Tel. 979-458-9881 fax: 979-847-8933 http://microscopy.tamu.edu <http://microscopy.tamu.edu/>

1 0

Movie Record/Encode with GPU?
by Alexander Hung Lee 18 Oct '23

18 Oct '23

Hi everyone, I have another question about scripting. I decided to use the morph command over a trajectory with 200 frames (imported as separate pdb's) to make a really smooth movie. Currently, my .cxc has matchmaker #2-200 to #1; morph #1-200 frames 8 same true play false; close #1-200 (< 5 mins) hbonds #201:UNL restrict :UNL :< 5 reveal true interModel false cacheDa true coordsets true (< 5 mins) movie record supersample 4; perframe "~label; label hbondatoms" ; coordset #201 1,1593; wait 1593; ~perframe; movie encode output movie.mp4 bitrate 6000 framerate 25 (> 1 hr) The output is buttery smooth, and the hbond calculation only takes 3-4 mins even with 1600 frames. However, I have a problem with the speed of recording/emcpdomg... it's more than an hour. I found it strange since if I played the trajectory from morph using coordset/slider, it barely takes any time and is very smooth. I was wondering if there was a way to make this recording/encoding faster or to switch from cpu to gpu if that was possible (and if it would help any)? On another note, I'm experimenting with smooth_md.py script but with trajectory files instead of pdb's. I'll see which one looks better/is faster Alex Lee PhD Student Woods Research Group<https://woodsgroup.franklinresearch.uga.edu/> Department of Biochemistry & Molecular Biology Complex Carbohydrate Research Center University of Georgia 315 Riverbend Rd. Athens, GA 30602 Email: ahl63010(a)uga.edu Mobile: (470) 641-3884

2 2

Open small molecule cif
by Jaremko, Matt Joseph 18 Oct '23

18 Oct '23

Hello, How do you open cifs for ligands? I’ve downloaded citrulline from the PDB database (attached), but I can’t open in ChimeraX: [cid:image001.png@01DA0026.3D6BC080] Thank you, Matt Matt J. Jaremko, Ph.D. (He|Him) Senior Scientist | Protein & Structural Chemistry Merck Research Labs | 2000 Galloping Hill Rd. | Kenilworth, NJ 07033 Office: 908.740.5613 | Cell: 808.741.6277 | Email: matt.jaremko(a)merck.com<mailto:matt.jaremko@merck.com> This e-mail message, together with any attachments, contains information of Merck & Co., Inc. (126 East Lincoln Ave., P.O. Box 2000, Rahway, NJ USA 07065) and/or its affiliates, that may be confidential, proprietary copyrighted and/or legally privileged. (Direct contact information for affiliates is available at - Contact us - MSD<https://www.msd.com/contact-us/>.) It is intended solely for the use of the individual or entity named on this message. If you are not the intended recipient, and have received this message in error, please notify us immediately by reply e-mail and then delete it from your system.

3 8

memory questions
by Tintos-hernandez, Alonso A 17 Oct '23

17 Oct '23

Hi i was trying to do some modeling using the alfafold colab but it says that i need to buy more memory to run more modeling, hos should i do that ? Jesus Tintos Childrens Hospital of Philadelphia Senior scientist II

3 2